If you've replaced your remote or need to re-link it to your drone, follow these steps to pair them successfully.
Ā
Step-by-Step Pairing Guide
Ā
1. Power On Both Devices
- Turn on theĀ droneĀ and theĀ remote controller.
Ā
2. Enter Pairing Mode on the Remote
- On the remote, press and hold theĀ Payload ReleaseĀ andĀ VideoĀ buttonsĀ at the same timeĀ for 4 seconds.
- Release when the remote beeps a second timeĀ
- Youāll see the lights begin flashing sequentially.
Ā
3. Enter Pairing Mode on the Drone
- Locate theĀ aircraft bind buttonĀ on the right side of the drone under the rubber protector.
- Press and hold the button until theĀ green light starts flashing.
Ā
4. Wait for the Devices to Pair
- Pairing may take up toĀ 2 minutes.
- Once the connection is successful, all the lights will stop flashing and remain solid.
Ā
Watch the ProcessĀ
For a visual demonstration, check out our video tutorial:Ā